chaaam.CNC STUDIO · VISUAL CAD / CAM
BROWSER-LOCAL ENGINEDXF + SVG · EXACT DIMENSIONSGENERIC NC REVIEW
VISUAL PROGRAMMING / V5.6

CNC Turning · ZX Profile Editor

X is programmed as DIAMETER · Z axial length · G18 plane

0 steps0.0 mm pathØ60 stock
V5 · Integrated CNC/CAM workbenchMASTER EDITION · ENGINEERING PREVIEW

Imported vector contours remain editable in the existing CAD Import Assistant. Review the source, known width, origin and closing gap before conversion. No OCR, GD&T or automatic feature recognition is claimed.

SourceNoneContours0Profile moves0
Open a DXF, DWG, SVG or image in the left panel to begin.

Generate an editable CAM proposal from the current 2D profile. Turning: rough OD longitudinal concept or face cut. Milling: contour as editable line moves, or a rectangular pocket operation from its bounding box. This is not tool compensation or automatic machining strategy.

No CAM proposal generated.

Offline isometric stock preview. Turning uses a revolved radial profile; milling shows an approximate XY footprint at a single depth. These illustrations do not model toolholder collision, chip formation, workholding or material physics.

Approximate toolpath visualization only — not collision certified.

Generic controller-neutral review only. Output is not machine-ready.

Select a controller to generate a non-executable review template.
Controller-specific NC export remains locked until machine/controller qualification. Original .NC output is separately marked as demonstration code.
◉ Z–X / LATHE● Simulation, not verified cutting
Z — · X —
Z AXIS·X DIAMETER
DIRECT COORDINATE INPUT

Write the move. See the line.

Start Z — · X —
G01 X34 Z-10Type endpoints or draw with your mouse; both update the same profile.
G18 · TURNINGDraw Line, Arc or OD/ID Thread; select any operation to edit dimensions.
CURRENT TOOLDNMG 150608R0.8 · 55°
TOOL POSITIONZ 0.0 / X 0.0N0000 · READY
SIMULATION PROGRESS0%Toolpath preview
Speed5×

Operation timeline · Click a step to edit its dimensions

Explore turning and milling toolpath drafts

  1. Choose a supported process and define geometry
  2. Adjust dimensions and machining operations
  3. Review the simulation and independently verify the generated output

Important: Generated CNC output is not automatically machine-safe. Verify offsets, units, clearances and controller behavior before use.

Browse all WRKDOCS tools · Report a problem